Page 29 - Demo

SQUARE SHOULDER ENDMILLS27APMXDCDRVSOALTHSZMS DCONMSLFRd%u00b0Designation DC APMX CICT(1) LF OAL DCONMS RPMX(2) RMPX%u00b0(3) THSZMS DRVS(4) TQ_3(5) CSP(6) kg MIID(7)HM90 EALD100-2MMT15-15JHP 25.40 14.00 2 39.50 56.50 24.00 37500 25.0 T15 20.0 43 1 0.10 HM90 AXCR 150504R-PHM90 EALD125-3MMT21-15JHP 31.75 14.00 3 39.90 63.00 30.00 31250 13.0 T21 24.0 43 1 0.17 HM90 AXCR 150504R-P%u2022 For adaptation, see page 9 (1) Number of inserts (or edges for solid tool) (2) Maximum RPM (3) Maximum ramping angle (4) Torque key size (5) Tool tightening torque (Nxm) (6) 0 - Without coolant supply, 1 - With coolant supply (7) Master insert identification For inserts: HM90 AXCR 1505For holders, see pages: MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-AV (90) %u2022 MM S-A-C# (96) %u2022 MM S-A-HSK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93) %u2022 MM S-D (89%u00b0 conical shanks) (94) %u2022 MM S-ER-H (95) %u2022 MM TS-A (92)Spare PartsDesignationHM90 EAL-MM-15-JHP SR 14-562 BLD T10/S7 SW6-SDHM90 EAL-MM-15-JHP90%u00b0 Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 AXCR 1505... Inserts for Machining AluminumDCONMSOALAPMXDCLFDRVSTHSZMSRd%u00b0Designation DC APMX LF OAL CICT(1) DCONMS RPMX(2) RMPX%u00b0(3) THSZMS DRVS(4) TQ_3(5) CSP(6) kg MIID(7)HM90 EALD125-2MMT21-16JHP 31.75 15.50 39.90 63.00 2 29.00 45643 22.4 T21 24.0 43 1 0.16 HM90 APCR 160502R-PHM90 EALD150-2MMT21-16JHP 38.10 15.50 39.90 63.00 2 30.00 36809 16.9 T21 24.0 43 1 0.20 HM90 APCR 160502R-P%u2022 For adaptation, see page 9 (1) Number of inserts (or edges for solid tool) (2) Maximum RPM (3) Maximum ramping angle (4) Torque key size (5) Tool tightening torque Nxm (lbfxin) (6) 0 - Without coolant supply, 1 - With coolant supply (7) Master insert identification For inserts: HM90 APCR 1605..R-PFor holders, see pages: MM S-A (stepped shanks) (90) %u2022 MM S-A (straight shanks) (93) %u2022 MM S-A-HSK (96) %u2022 MM S-B (85%u00b0 conical shanks) (93)Spare PartsDesignationHM90 EAL-MM-16-JHP SR 14-0180 BLD T20/M7 SW6-THM90 EAL-MM-16-JHP90%u00b0 Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum